How To Install Bathroom Mirror?

How To Install Bathroom Mirror?

10-10-2021

Below is pictures of our mirrors installed in luxury hotels and resorts from clients 

Hotel mirrors

In order to take care of yourself after taking a shower, the installation of bathroom mirrors is naturally indispensable. Let us discuss how to install bathroom mirrors correctly.

The mirror is an important part of furniture that can facilitate our grooming, and it is also an indispensable part of the bathroom. The clear and bright bathroom mirror can not only bring people a good mood when dressing up but also extend the bathroom space. The effect is to make the bathroom look more spacious.
So how to install the bathroom mirror correctly and firmly in the bathroom? In fact, the method is not complicated. Just follow the steps below to install the bathroom mirror quickly and safely.


First, distinguish the type of bathroom mirror
The first thing we need to do is to distinguish the types of bathroom mirrors. Different types of bathroom mirrors have different installation methods. Generally, there are three types of large bathroom mirrors, table mirrors, and embedded bathroom mirrors. Let us understand in order.


1.1 Large bath mirror
Let’s talk about the big bath mirror first. This kind of mirror is usually directly attached to the wall of the bathroom. It has a large size and can illuminate the images of our half body. It is widely used.

1.2 mirrors
The table mirror is relatively small in size and flexible in use. It can be used directly on the dressing table, or it can be fixed on the wall, usually used for detailed makeup.

1.3 Embedded Bath Mirror
There is also a built-in bath mirror, which is usually directly embedded in the wall cabinet during decoration, which is very space-saving and convenient and flexible to use, but in most cases is combined with the bathroom cabinet.


2. Preparation before installation
There is also a built-in bath mirror, which is usually directly embedded in the wall cabinet during decoration, which is very space-saving and convenient and flexible to use, but in most cases is combined with the bathroom cabinet.

2. Preparation before installation
Let’s start to understand the installation of the big bath mirror. First, we must prepare for the installation in advance. The inspection of the wall, the measurement of the hook distance, and the determination of the center point are important matters that need to be done in advance.

2.1 Check the wall
The so-called inspection wall is actually to ensure that the wall where the mirror is installed is a load-bearing wall that can support the weight of the mirror. This is an important foundation for installing the bathroom mirror.

2.2 Measuring the hook distance
Next is to measure the distance between the hooks, you can use the tape measure to measure the width and height of the wall, and then measure the distance between the center points of the two hooks.

2.3 Determine the center point
Then use a pencil to make a clear mark at the position of the two center points, so that the position can be more conveniently found during installation, and the installation is more stable and firm.


3. The installation officially started
After the preparation work is completed, the installation can be officially started. This process is mainly divided into four steps: drilling, expanding screws, screwing, and fixing the mirror.

3.1 Drilling
First use the prepared impact drill to punch holes at the marked center point. The drill bit is best to use 6mm-8mm specifications. The depth of the punching hole should be kept at about 5cm.
In addition, be careful not to damage the wall when drilling. Since most of the bathrooms now use tiled walls, it is best to choose to drill holes in the joints to avoid wall damage .

3.2 hit the expansion screw
Next is the expansion screw, we need to use a hammer to drive the expansion screw into the drilled hole.

3.3 Screw
The next step is to tighten the screws. Just use a screwdriver to screw the screw into the expansion screw, if it is a 7-shaped hook, you need to use pliers. Then leave a distance of about 5mm from the wall, and the extra nail part is just used to hang the mirror.

3.4 Fixed mirror
Finally, you can align the fastener part of the mirror with the screw and hang it. If the misalignment occurs, you can use a hammer and other tools to change the deviation of the nail slightly.

In addition, if you feel that the bathroom mirror is not stable enough to be hung by only two nails, after installation, you can also apply fixing glue around the mirror frame, which can play a fixed role.

If you want to know more about installation of different mirros. Welcome to contact us. We have various structures to meet your demand!

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy